Free · runs in your browser

Classroom noise meter

A free noise traffic light for the classroom. Green when the room is working quietly, amber when it is getting loud, red when it is too loud, with a timer that counts how long the class stays quiet.

  • Full screen for the board
  • Quiet-streak timer
  • No login, nothing recorded

Classroom noise meter

Press start

—

Quiet for0 s
Best0 s
Too loud0

Thresholds are a starting point. Press "Set from this room" while the class works quietly.

Your browser will ask for microphone permission. Nothing is recorded, saved or uploaded.

Set up in 3 steps

  1. Press Start listening and allow the microphone.
  2. While the class works quietly, press Set from this room. It sets amber and red just above your normal working noise.
  3. Press Full screen and show it on the board.

No account, no recording. The sound never leaves this device.

More tests: follow the sign

This classroom noise meter listens through your computer's microphone and shows a big traffic light. Green means the class is working quietly, amber means it is getting louder, and red means it is too loud. Press Start listening, then Set from this room while the class works quietly, then Full screen for the projector. It does not record anything and needs no login.

Using it with a class

  • Quiet streak: the timer counts how long the room has stayed out of the red. Set a target, such as ten minutes of quiet work, and celebrate when the class beats its best.
  • Too loud count: each time the room stays in the red for a second, the count goes up by one. Talk about what caused the jump rather than just the number.
  • Gentle chime: optional. It plays two soft notes when the light turns red, at most once every 8 seconds, so the class hears the reminder without you saying it.
  • Number on or off: younger classes often do better with just the colours. Older students may like seeing the dBA figure.

Choosing the thresholds

Every classroom and every microphone is different, so fixed numbers rarely work. Set from this room listens for 5 seconds while your class works quietly. It then sets amber 8 dB and red 15 dB above that level. You can type your own values at any time. Raise them for group work and lower them for silent reading.

The numbers are an uncalibrated estimate unless you have calibrated this device on the decibel meter. Judge by the colours and by your own room, not by the figure alone.

Will it work on our devices?

  • Laptops and desktops: built for current Chrome, Edge, Firefox and Safari. Use the built-in microphone or a USB microphone placed in the middle of the room, not next to the teacher's desk.
  • Chromebooks and iPads: run it in the browser. If the browser does not allow true full screen, the meter fills the window instead; press Exit or Escape to leave.
  • Keep the tab visible. Some browsers slow down background tabs, which can pause the meter.

Privacy

The microphone signal is turned into a level number in the browser and thrown away straight after. Nothing is recorded, stored or uploaded, and there is no account. There are no student names or data. You can check this in our privacy notice.

How loud is a classroom?

For reference, NIDCD lists normal conversation at 60–70 dBA, and says sounds at or below 70 dBA are unlikely to cause hearing loss even after long exposure. A noisy classroom is a learning and wellbeing problem long before it is a hearing-safety one. Use the colours to manage the noise, not as a health measurement. For the full scale, see the decibel chart.

Common questions

Is there a free classroom noise monitor?

Yes, this one is free with no account. It runs in the browser on a laptop, Chromebook or iPad, and nothing is recorded.

What decibel level should a classroom be?

There is no single number that suits every room and microphone, which is why the meter sets its thresholds from your own class working quietly. NIDCD lists normal conversation at 60–70 dBA for reference.

Does it record the students?

No. It only measures how loud the room is, in the browser, and discards the sound immediately. Nothing is saved or uploaded.

Why does the light go red when nobody is loud?

The thresholds may be too low for your room or microphone. Press Set from this room during quiet work, or raise the red value. Make sure the microphone is not right next to a fan, projector or the teacher.

Can I use it with a traffic light or bouncing balls theme?

It uses a traffic light. It has no themes or games; it is built to stay readable from the back of the room.

Last reviewed 14 November 2026 by Sri Murugan Systems. Found a mistake? Tell us.