Free · runs in your browser

Speaker polarity test

Find a speaker wired backwards. Play version A, then B. If B sounds fuller, one speaker has its + and − wires swapped.

  • About 1 minute
  • Two speakers needed
  • Home and car audio

Play both versions

Starts at 20% volume. Turn your device volume down before the first press.

Confirming
Polarity test

To: Your speakers · via your browser

Date—
Channels—
Rate—
SignalPink noise 40–500 Hz
Fuller versionNot tested
WiringNot tested
Next stepNot tested
audiotesthq.com

Your result appears here as you answer. Nothing is uploaded.

More tests: follow the sign

A speaker polarity test plays the same sound twice: version A with both speakers in phase, and version B with one speaker deliberately inverted. Sitting between your speakers, version A should sound fuller, with firmer bass and a sound that sits in the middle. If version B sounds fuller instead, one of your speakers is wired with its + and − reversed.

Why polarity matters

When one speaker is wired backwards, its cone moves in while the other moves out. Low frequencies from the two speakers then cancel each other, so bass sounds thin, and the centre image becomes vague and hard to place. Nothing is damaged, but the system sounds noticeably worse.

How to fix reversed polarity

  1. Turn the amplifier off.
  2. On one speaker only, swap the two wires: the one on the red (+) terminal goes to black (−), and the other way round. Speaker wire usually has a stripe, ridge or printed text on one conductor to help you tell them apart.
  3. Turn the amplifier on and run the test again. Version A should now sound fuller.

Tips for a clear result

  • Sit centred between the speakers, at the same distance from each.
  • The test does not work on a single speaker, a mono device or a phone speaker.
  • In a car, sit in the middle of the back seat if you can, and fade the sound to the pair you are testing.

Common questions

What happens if speakers are out of phase?

Bass cancels between the speakers and the stereo image loses its centre. It does not harm the equipment.

Is polarity the same as phase?

In everyday use people say 'out of phase' for reversed polarity. Strictly, polarity is the + and − wiring, and phase is about timing, but this test checks the wiring.

Can I test polarity with headphones?

Headphones are almost never wired backwards, and the effect sounds different inside your head. This test is meant for speakers.

Last reviewed 14 November 2026 by Sri Murugan Systems. Found a mistake? Tell us.