Free · runs in your browser

Noise exposure calculator

Enter the noise levels you are exposed to and for how long. See your daily noise dose and 8-hour average under the NIOSH recommended limit and the OSHA legal limit.

  • NIOSH and OSHA
  • Any number of periods
  • Formulas shown

Your day's noise

Add each period: its level in dBA and how long it lasted.

NIOSH dose—
NIOSH 8-h average—
OSHA dose—
OSHA 8-h average (TWA)—

Levels below 80 dBA are not counted, as in OSHA's measurement rule.

Confirming
Noise dose

To: Your working day · via your browser

Date—
Periods—
Total time—
RulesNIOSH + OSHA
NIOSH doseNot tested
OSHA doseNot tested
OSHA TWANot tested
audiotesthq.com

Updates as you type. Nothing is uploaded.

More tests: follow the sign

This calculator works out your daily noise dose from the levels you are exposed to and how long each lasts. 100% dose means you have reached the limit for the day. It shows the result under the NIOSH recommended limit (85 dBA for 8 hours) and the OSHA permissible limit (90 dBA for 8 hours). Measure each part of your day with the decibel meter first, then add each period here.

NIOSH and OSHA: two different rules

MeasureNIOSH (recommended)OSHA (legal, US workplaces)
8-hour limit85 dBA90 dBA (permissible exposure limit)
Exchange rate3 dBA: each 3 dBA more halves the time5 dBA: each 5 dBA more halves the time
Hearing conservation–Program required from an 8-hour average of 85 dBA (the action level, 50% dose)
Allowed time T at level LT = 8 ÷ 2(L − 85)/3 hoursT = 8 ÷ 2(L − 90)/5 hours
8-hour average from dose D85 + 10·log10(D/100)TWA = 16.61·log10(D/100) + 90

Sources: NIOSH noise and hearing loss prevention (CDC) for the 85 dBA limit and the 3 dBA rule. The NIOSH formulas above follow directly from that rule. OSHA 29 CFR 1910.95, Table G-16 and Appendix A, for the OSHA limit, action level and formulas.

How the dose is calculated

For each period, divide the time spent (C) by the allowed time at that level (T). Add the fractions and multiply by 100: D = 100 × (C1/T1 + C2/T2 + …). That is OSHA's formula, and NIOSH's works the same way with its own T. Following OSHA's measurement rule, which integrates all sound from 80 to 130 dB, periods below 80 dBA are not counted.

Example: 4 hours at 95 dBA. OSHA allows 4 hours at 95 dBA, so the OSHA dose is 4 ÷ 4 = 100%, exactly at the limit. NIOSH allows about 47 minutes at 95 dBA, so the NIOSH dose is about 500%.

Allowed time per day at each level

LevelNIOSHOSHA
80 dBAover 24 hover 24 h
82 dBA16 hover 24 h
85 dBA8 h16 h
88 dBA4 h10 h 33 min
90 dBA2 h 31 min8 h
91 dBA2 h6 h 58 min
92 dBA1 h 35 min6 h 4 min
94 dBA1 h4 h 36 min
95 dBA47 min4 h
97 dBA30 min3 h 2 min
100 dBA15 min2 h
102 dBA9 min 27 s1 h 31 min
103 dBA7 min 30 s1 h 19 min
105 dBA4 min 43 s1 h
106 dBA3 min 45 s52 min
110 dBA1 min 29 s30 min
115 dBA28 s15 min

OSHA values match Table G-16 (for example 90 dBA 8 h, 95 dBA 4 h, 100 dBA 2 h, 105 dBA 1 h, 110 dBA 30 min, 115 dBA 15 min). OSHA also limits impulsive or impact noise to 140 dB peak.

Limits of this calculator

  • It is for planning and learning, not compliance. Workplace exposure must be measured with a personal noise dosimeter or a Class 1/2 sound level meter by a qualified person.
  • Your result is only as good as the levels you enter. Phone readings without calibration can be off by 10 dB or more, and 10 dB is a factor of ten in NIOSH dose.
  • It covers continuous noise. Gunshots and other impulse noise need peak measurements.
  • Hearing protection lowers what reaches your ears, but its real-world reduction is usually less than the label number. This calculator does not subtract it.

Common questions

What is the OSHA noise exposure limit?

90 dBA averaged over 8 hours, with the allowed time halving for every 5 dBA more (Table G-16 in 29 CFR 1910.95). From an 8-hour average of 85 dBA, employers must run a hearing conservation program.

What is the NIOSH recommended exposure limit for noise?

85 dBA averaged over an 8-hour workday, with the time halved for each 3 dBA increase.

Why is my NIOSH dose so much higher than my OSHA dose?

NIOSH halves the time every 3 dBA and starts at 85 dBA; OSHA halves it every 5 dBA from 90 dBA. At high levels the NIOSH limit is much stricter.

How do I calculate noise dose?

Divide the time at each level by the allowed time at that level, add the fractions and multiply by 100. 100% is the daily limit.

Is 85 dB safe for 8 hours?

85 dBA for 8 hours is exactly the NIOSH recommended limit (100% dose) and the OSHA action level (50% OSHA dose). NIDCD says long or repeated exposure at or above 85 dBA can cause hearing loss.

Last reviewed 14 November 2026 by Sri Murugan Systems. Found a mistake? Tell us.